When the extracted IP is set in the software, whether the IP will be automatically changed after the time is up mainly depends on whether the software used has the function of automatic IP change and the relevant settings of the user. The following is a detailed answer:
Software function:
First, confirm whether the software has the function of automatic IP change. Some professional IP proxy software does provide such a function. Users can set the time for automatic IP switching in the software, such as setting it to 10 seconds, 30 seconds or longer time intervals.
User settings:
If the software supports the automatic IP change function, the user needs to correctly set the IP address, port number and automatic switching time in the software. Only after the automatic switching time is set, the software will automatically change the IP after the set time is reached.
IP source and type:
The IP address mentioned here, no matter where it is extracted from, whether it will be automatically changed mainly depends on the function settings of the software, not the type of IP itself (such as dynamic or static). Even if it is a static IP, as long as the software supports and sets the automatic change function, it can also achieve automatic IP change.
Actual operation and verification:
After setting the automatic IP change function, users can verify whether the automatic IP change is successfully achieved by actually running the software and observing the changes in the IP address. For example, after the connection is successful, you can check whether the local IP address has changed.
Notes:
Frequent IP changes may affect the stability and speed of the network connection, so it is recommended that users reasonably set the duration of automatic IP change according to actual needs.
When using IP software, it is necessary to comply with relevant laws and regulations and Internet service agreements, and illegal activities or abuse of IP resources are not allowed.
Summary:
If the software supports the automatic IP change function and the user has correctly set the automatic switching duration, the IP will be automatically changed when the duration is reached.
Regardless of the source and type of the IP address, as long as the software has and enables the automatic IP change function, the automatic IP change can be achieved.
When setting and using the automatic IP change function, users need to pay attention to rationality and legality.